Oct 13, 2026

CUI marking, explained: VSO blog header

CUI marking explained: banners, designation indicators, and CUI Basic versus Specified

author thom walters

CUI marking is the part of the Controlled Unclassified Information (CUI) program that people see every day, and it is where small errors spread fastest. A document marked correctly tells every person and every system downstream how to handle it. A document marked incompletely gets copied, attached, and exported until nobody can say where the controlled version went. This post walks through the elements of a correct marking, the difference between CUI Basic and CUI Specified, and the marking gaps that show up most often in contractor environments.

What are the required elements of a CUI marking?

A correct CUI marking has a banner marking at the top of each page and a designation indicator that shows who designated the information. Everything else, including category markings and portion markings, depends on the type of CUI and the agency’s policy.

The banner can contain up to three elements under 32 CFR 2002.20:

  • The CUI control marking, which is mandatory and may be either “CUI” or “CONTROLLED.”
  • Category or subcategory markings, which are mandatory for CUI Specified and optional for CUI Basic unless an agency requires them.
  • Limited dissemination control markings, such as NOFORN, when a dissemination limit applies.

The designation indicator is required on every document containing CUI. It must identify at least the designating agency, and it may appear only on the first page or cover. In Department of Defense (DoD) documents it usually appears as a “Controlled by” block.

What is the difference between CUI Basic and CUI Specified?

CUI Basic is CUI whose underlying law, regulation, or government-wide policy does not set specific handling rules, so the standard CUI safeguards apply. CUI Specified is CUI whose authority adds handling or dissemination rules that differ from the standard ones.

The difference shows up in the banner. A CUI Basic document can be marked simply “CUI.” A CUI Specified document must carry its category marking after a double slash, and the National Archives registry lists those markings with an “SP-” prefix. For example, the CUI Registry marking list shows “CUI//SP-AIV” for accident investigation information.

CUI Basic CUI Specified
Handling rules come from Standard CUI program safeguards The specific authority, in addition to CUI program rules
Category marking in banner Optional unless agency policy requires it Required
Example banner CUI CUI//SP-AIV
Portion marking Optional; if used, mark every portion Optional; if used, mark every portion, including category markings

How does portion marking work?

Portion marking labels individual paragraphs, table cells, or sections so a reader can tell which parts are controlled. Agencies are permitted to portion mark all CUI, and when portion markings are used, authorized holders must mark both the CUI portions and the uncontrolled portions. Portion marking is optional under the regulation, but a document that is portion marked has to be marked completely.

For a contractor, portion marking is most useful in deliverables that mix controlled and public information, such as a technical report with an unclassified executive summary. It is also what lets someone extract the public paragraph later without guessing.

Annotated example: a correctly marked contractor document

Consider an illustrative engineering drawing package a machining subcontractor produces under a DoD contract that designates the technical data as CUI. A correctly marked package includes:

  • A banner reading “CUI” at the top and bottom of every page, or the Specified marking the contract calls for.
  • A “Controlled by” block on the cover naming the designating DoD office, the CUI category, any dissemination control, and a point of contact, as the contract or its guidance directs.
  • Portion markings on the transmittal letter, where only the attachment is controlled.
  • The same banner in the email subject line or body when the package is sent, and on the removable media label if it leaves on a drive.

The last item is the one that slips. Marking rules follow the information, not the file format.

CUI marking example showing banner, designation indicator, and portion marking

Where CUI marking breaks down in practice

Most CUI marking failures are not wrong markings. They are missing markings on derivative copies. The original contract deliverable is marked correctly, then someone exports a spreadsheet, screenshots a drawing, or pastes a paragraph into a status report, and the copy leaves without a banner.

Physical copies drift too. Printed CUI needs its banner on every printed page, and a drive carrying CUI needs a label on the media itself. A page-footer banner that only prints on page one, or a thumb drive labeled only in a spreadsheet, fails the rule that marking travels with the information.

Three controls reduce that drift:

  • Templates with banner and designation indicator fields built in, so authors start from a marked document.
  • Sensitivity labels in your productivity suite that apply visible markings and carry the label into files and email. Our post on AI data classification as the first control covers how labels feed downstream protections.
  • Endpoint and data loss prevention rules that watch for CUI-labeled files leaving managed devices. VSO’s End User Services team manages those device controls day to day.

Once CUI is marked consistently, questions about who can change its status become easier to answer. See our guide to who can decontrol CUI.

Getting CUI marking right the first time

CUI marking comes down to two mandatory pieces (the banner and the designation indicator) plus the category and portion markings your CUI type requires. Build them into templates, carry them with labels, and watch for unmarked copies at the endpoint, where most marking errors actually happen.

Want CUI labels and device controls that keep markings attached to the data? Contact us today at sales@vso-inc.com or reach VSO’s end user services team.

Frequently asked questions

CUI Basic is Controlled Unclassified Information whose governing law, regulation, or government-wide policy does not set specific handling or dissemination controls. It is protected under the standard CUI program safeguards. A CUI Basic document can carry a banner that reads simply “CUI,” with category markings optional unless the designating agency’s policy requires them.

Mark a CUI document with a banner at the top of each page reading “CUI” or “CONTROLLED,” plus any required category and dissemination markings, and add a designation indicator showing which agency designated the information. For CUI Specified, include the category marking in the banner and portion mark the document. Follow your contract’s CUI guidance for agency-specific fields.

The authorized holder who designates information as CUI is responsible for marking it, and every holder who creates a derivative document must carry the markings forward. For contractors, that usually means the author of a deliverable marks it according to the contract’s CUI guidance, and anyone who copies or excerpts controlled content must mark the new document too.

Portion marking is permitted for CUI but not required by 32 CFR 2002.20(f). When a document is portion marked, every portion must be marked, both the CUI portions and the uncontrolled ones. Some agencies and contracts require portion marking by policy, so check the CUI guidance attached to your contract before deciding.

Yes. CUI marking rules follow the information, not the format, so an email that contains CUI or carries a CUI attachment needs a CUI banner marking. Many organizations place the banner in the subject line and the body. Sensitivity labels in Microsoft 365 or similar tools can apply the marking automatically when a labeled file is attached.

Share This Story, Choose Your Platform!